AS 3688-2005 Water supply-metallic fittings and end connectors
|
ID： |
F9C77470559D452D8835D456AD552C65 |
|
文件大小(MB)： |
0.76 |
|
页数： |
68 |
|
文件格式： |
|
|
日期： |
2008-7-25 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
AS 3688—2005,Australian Standard.,Water supply—Metallic fittings and end,connectors,AS 3688—2005,Copyrighted material licensed to Tim Chambers on 08-Sep-2006 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Scientific, Inc., www.techstreet.com.,This Australian Standard was prepared by Committee WS-001, Water Fittings. It,was approved on behalf of the Council of Standards Australia on 3 May 2005.,This Standard was published on 4 August 2005.,The following are represented on Committee WS-001:,Australian Chamber of Commerce and Industry,Australian Industry Group,Australian Valve Manufacturers Association,AUSTAP,Brisbane City Council,Building Research Association of New Zealand,Business New Zealand,Certification Bodies (Australia),Department of Land and Water Conservation NSW,Department of Local Government and Planning (Queensland),Institute of Plumbing Australia,Master Plumbers, Gasfitters and Drainlayers New Zealand,Plastics New Zealand,Queensland Brassware Industry Advisory Panel,South Australian Water Corporation,Water Corporation Western Australia,Keeping Standards up-to-date,Standards are living documents which reflect progress in science, technology and,systems. To maintain their currency, all Standards are periodically reviewed, and,new editions are published. Between editions, amendments may be issued.,Standards may also be withdrawn. It is important that readers assure themselves,they are using a current Standard, which should include any amendments which,may have been published since the Standard was purchased.,Detailed information about Standards can be found by visiting the Standards Web,Shop at www.standards.com.au and looking up the relevant Standard in the on-line,catalogue.,Alternatively, the printed Catalogue provides information current at 1 January each,year, and the monthly magazine, The Global Standard, has a full listing of revisions,and amendments published each month.,Australian StandardsTM and other products and services developed by Standards,Australia are published and distributed under contract by SAI Global, which,operates the Standards Web Shop.,We also welcome suggestions for improvement in our Standards, and especially,encourage readers to notify us immediately of any apparent inaccuracies or,ambiguities. Contact us via email at mail@standards.org.au, or write to the Chief,Executive, Standards Australia, GPO Box 476, Sydney, NSW 2001.,This Standard was issued in draft form for comment as DR 04545.,Copyrighted material licensed to Tim Chambers on 08-Sep-2006 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Scientific, Inc., www.techstreet.com.,AS 3688—2005,Australian Standard.,Water supply—Metallic fittings and end,connectors,First published as AS 3688—1994,Third Edition AS 3688—2005.,COPYRIGHT,. Standards Australia,All rights are reserved. No part of this work may be reproduced or copied in any form or by,any means, electronic or mechanical, including photocopying, without the written,permission of the publisher.,Published by Standards Australia, GPO Box 476, Sydney, NSW 2001, Australia,ISBN 0 7337 6810 5,Copyrighted material licensed to Tim Chambers on 08-Sep-2006 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Scientific, Inc., www.techstreet.com.,AS 3688—2005 2,PREFACE,This Standard was prepared by the Joint Standards Australia and Standards New Zealand,Committee WS-001, Water Fittings, to supersede AS 3688—1994, Water supply—Copper,and copper alloy compression and capillary fittings and threaded-end connectors.,The objective of this Standard is to provide for innovation and for a range of fittings that,allows for a mixture of pipe materials to be used.,This edition includes amendments and various industrial and editorial revisions according,to Standards Australia requirements.,It has been expanded to include fittings of other materials and end connectors used to,connect pipes and fittings of dissimilar materials.,The term ‘normative’ has been used in this Standard to define the application of the,appendix to which it applies. A ‘normative’ appendix is an integral part of a Standard.,Copyrighted material licensed to Tim Chambers on 08-Sep-2006 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Scientific, Inc., www.techstreet.com.,3 AS 3688—2005,CONTENTS,Page,SECTION 1 SCOPE AND GENERAL,1.1 SCOPE 5,1.2 APPLICATION .. 5,1.3 REFERENCED DOCUMENTS . 5,1.4 DEFINITIONS 5,1.5 DESIGNATION OF SIZE . 6,1.6 MARKING 6,1.7 PRODUCT DOCUMENTATION . 7,SECTI……
……